AEG BSB18BL2 Traducción Del Manual Original página 9

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
EN
ORIGINAL INSTRUCTIONS
SPECIFIED CONDITIONS OF USE
The percussion drill is intended to be used for non-percussion
drilling in wood, plastics, and metals, and percussion drilling in
masonry. The product can also be used for driving and removing
screws.
Do not use the product for any other purpose.
WARNING! Read all safety warnings, instructions,
Failure to follow all instructions listed below may result in electric
for future reference.
PERCUSSION DRILL SAFETY WARNINGS
Safety instructions for all operations
cause hearing loss.
Loss of control can cause personal
fasteners contacting a "live" wire may make exposed metal parts of
the power tool "live" and could give the operator an electric shock.
At higher speeds, the bit is likely to bend if
allowed to rotate freely without contacting the workpiece, resulting
At higher speeds, the bit is likely to bend if
allowed to rotate freely without contacting the workpiece, resulting
Bits can bend causing breakage or loss of
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Clamp the workpiece with a clamping device. Unclamped
immediately if it stalls. Do not turn on the product again while it is
still stalled, as doing so could trigger a sudden recoil with a high
reactive force. Determine why the product stalled and rectify this,
paying heed to the safety instructions.
The dust produced when using the product may be harmful to
health. Do not inhale the dust. Wear a suitable dust protection
mask.
Remove the battery pack before starting any work on the product.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING!
product damage due to a short circuit, never immerse your tool,
chemicals, and bleach or bleach containing products, etc., can
cause a short circuit.
Do not dispose of used battery packs in the household refuse or
protect our environment.
Battery packs that have not been used for some time should be
recharged before use.
For an optimum lifetime, the battery packs have to be fully charged
after use.
For battery pack storage longer than 30 days:
away from moisture.
• Every six months of storage, charge the battery pack as normal.
Exposure to noise can
Cutting accessory or
The battery pack has overload protection that protects it from being
overloaded and helps to ensure long life.
If the product does not start up again, the battery pack may have
discharged completely. Recharge the battery pack.
Legislation requirements.
Transportation of those batteries has to be done in accordance with
local, national, and international provisions and regulations.
• Batteries can be transported by road without further requirement.
• Commercial transport of lithium-ion batteries by third parties is
and transport are exclusively to be carried out by appropriately
trained persons and the process has to be accompanied by
corresponding experts.
When transporting batteries:
• Ensure that the battery contact terminals are protected and
insulated to prevent short circuit.
• Ensure that the battery pack is secured against movement within
the packaging.
• Do not transport batteries that are cracked or leaking.
• Check with the forwarding company for further advice.
KNOW YOUR PRODUCT
1. Auxiliary handle, insulated gripping surface
Gear selector
3.
4. Keyless chuck
Variable speed switch trigger
6. Direction of rotation selector
Handle, insulated gripping surface
8. Belt clip
9. LED light
10. Battery pack
11.
MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics
are susceptible to various types of commercial solvents and may
be damaged by their use. Use clean cloths to remove dirt, carbon
dust, etc.
be performed by service agents.
that have not been described need to be replaced, contact one
addresses).
the product type and the serial number printed on the label,
and order the drawing at your local service agent or directly
Winnenden, Germany.
SYMBOLS
Read the instructions carefully before starting the
product.
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any work on
the product.
No-load speed
EN
DE
FR
IT
ES
PT
NL
DA
NO
SV
FI
EL
TR
CS
SK
PL
HU
SL
HR
LV
LT
ET
RU
BG
RO
MK
UK
AR
9
loading