Idiomas disponibles
Idiomas disponibles
1
INTRODUCTION AND MAIN INFORMATION
This equipment must only be installed by
suitably qualified personnel.
It is important to fully read and understand
this installation and use manual before
installing, commissioning, or maintaining
the equipment.
Failure to comply with these instructions
could result in injury or damage.
To guarantee the best operation and per-
formance the SimeConn must be installed
in accordance with these instructions.
Failure to observe these instructions could
result in loss of warranty. The operation of
the SimeConn is also dependant on the sys-
tem design and boiler plant.
This manual is an integral part of the equip-
CAREFULLY READ
THE INSTRUCTIONS
40
ment and must be handed to the owner /
user of the equipment.
The manufacturer reserves the right to
amend the technical and construction fea-
tures, without prior warning, in order to
improve the same product.
The thermal module SimeConn is an inter-
face between a user and a centralised heat-
ing plant or city distribution network (district
heating).
The equipment has been designed to dis-
tribute domestic hot and cold water, and
heating/cooling water.
It is suitable for in wall installation with the
external panel flush fitted to the wall.
SYMBOLS AND SAFETY WARNINGS
DANGER
OF ELECTROCUTION
APPLICATIONS AND CHARACTERISTICS
SimeConn is the ideal complement in new
building construction with central heating at
low or high temperature.
It is also ideal for installation into existing
structures in which there is no possibility of
installing wall hang boiler, simplified where
there are existing distribution ducts.
The SimeConn is equipped for metering of
domestic hot and cold water, and enables
the counting and management of an inter-
nal heating system.
The metering is at individual units, with the
ability to be expanded to be read at a cen-
tral location, or remotely via the internet.
DANGER OF SCALDING
DUE TO HIGH
TEMPERATURES
