Idiomas disponibles
Idiomas disponibles
[13] Letting the dog into the trailer
• Ensure that the trailer is stable on a flat horizontal surface.
• Ensure that the trailer cannot move by holding it and applying the parking brake.
• Open the rear mesh panel by undoing the zipper all around
• Guide the dog into the trailer patiently
• To prevent the dog from jumping out of the trailer we recommend restraining the dog with a short leash to the leash
attachment points inside the trailer[2o].
• Close the zippers of all the openings.
• Make sure the dog is laying or sitting down according to table B and comfortable before starting off.
[14] Rear light
• Attach the red light [14a] on the pushbar facing the rear. Pull the rubber elastic around the pushbar and attach it to the tracks
on each side of the light.
• Place the light on the side of the trailer nearest the middle of the road.
• About the light: Name: Presto 2; K-mark: K1180; Batteries: 2x AG13/LR44 1.5 V. (included).
• To change the batteries press each side and remove the front cover.
[15] Detaching the trailer from the bicycle
• To detach the trailer from the bicycle detach the safety strap [15a] first and then pull the safety sleeve [15b] and then press the
grey button [15c] and pull the bicycle arm off the hitch [15d].
• To detach the bicycle arm from the trailer slide the bicycle arm connection button [15e] backwards. The end of the bicycle arm
will drop down and then the bicycle arm can be pulled out.
• When using the stroller wheel, the bicycle arm should be stored in the pocket [2n] inside the trailer.
[16] Folding the trailer
• WARNING: Before folding always make sure the trailer is empty!
• Before folding, the safety flag must be removed, all compartments closed and the pushbar adjusted to the folding position.
• To unlock the folding mechanism: push forward against the grey safety button [16b] on both sides of the trailer and at the
same time pull the fold lock triggers [16a] upwards.
• Push the pushbar forward and the trailer will start to fold.
• When feeling resistance, make sure the fabrics are folded neatly into the trailer to avoid damaging the fabrics.
CARE AND MAINTENANCE
[17] Storage
• It is highly recommended to store the trailer indoors, in a dry and well-ventilated area out of direct sunlight.
• Do not store the trailer in a place that can reach a temperature above 50 degrees Celsius like the trunk of a car.
[18] Maintenance
• The interior fabric [2m] can be removed from the trailer for cleaning purposes (see washing label) or replacement by undoing
the zipper [18a].
• The top fabric [2k] can be revoved for replacement or cleaning. Undo the zipper [18b] all around the trailer and unbolting the
the fold lock pins [18c] while holding the nut on the inside with a spanner. Assembly in reverse order.
• Warning! Always make sure both fold lock pins [18c] are securely fastened!
• The bicycle trailer can be fitted with a replaceable rain cover (sold separately) that is attached to the front mesh window.
• Bicycle arm connection [2f]; If there is dirt inside the bicycle arm connection, rinse it with water.
• Do not use cleaning solvents. Clean only with mild soap and water.
• If you ever need to replace the brake cables on your trailer, please contact Hamax customer support for instructions.
• Allow the trailer fabric to dry completely before storing it to prevent it from becoming moldy.
• If the trailer is involved in an accident or is damaged, contact your dealer to check if it can still be used.
• All important components such as: drawbar, connecting device, frame, lighting equipment, tires, and wheels, etc.should be
verified regularly whether bolted assemblies are well tightened.
p. 14
