Graco XR9 Funcionamiento página 3

ÐÑÏÅÉÄÏÐÏßÇÓÇ
Êßíäõíïò ÖùôéÜò, ¸êñçîçò êáé
Çëåêôñïðëçîßáò
Ôõ÷üí åóöáëìÝíç ãåßùóç, áíåðáñêÞò áåñéóìüò,
ãõìíÝò öëüãåò Þ óðéíèÞñåò, ìðïñïýí íá
äéáìïñöþóïõí åðéêßíäõíåò óõíèÞêåò êáé íá
ðñïêáëÝóïõí öùôéÜ Þ Ýêñçîç êáé çëåêôñïðëçîßá.
Ãéá íá áðïöýãåôå áõôïýò ôïõò êéíäýíïõò:
• Ôï ìç÷Üíçìá âáöÞò ðñÝðåé íá åßíáé ãåéùìÝíï ìå
çëåêôñéêÞ Ýîïäï ùò åîÞò:
- ×ñçóéìïðïéåßôå ìüíï ãåéùìÝíåò çëåêôñéêÝò
åîüäïõò.
- ×ñçóéìïðïéåßôå êáëþäéá ðñïÝêôáóçò
áðïêëåéóôéêÜ 3 óõñìÜôùí.
- Ôá Üêñá ãåßùóçò óôï ìç÷Üíçìá âáöÞò êáèþò
êáé ôùí êáëùäßùí ðñïÝêôáóçò ðñÝðåé íá åßíáé
Üèéêôá.
• Äéáôçñåßôå óôåãíÝò ôéò çëåêôñéêÝò óõíäÝóåéò
êáé ôï åóùôåñéêü ôïõ êáëýììáôïò.
• Áðïöåýãåôå ôçí åðáöÞ ìå áãùãïýò çëåêôñéêïý
ñåýìáôïò.
• ×ñçóéìïðïéåßôå óå åîùôåñéêü ÷þñï Þ óå ÷þñïõò
ìå êáëü áåñéóìü.
• ÊáôÜ ôïí øåêáóìü Þ ôï ðëýóéìï, ôï ìç÷Üíçìá
âáöÞò ðñÝðåé íá áðÝ÷åé ôïõëÜ÷éóôïí 6 m (20 ft)
áðü ôï ðéóôüëé.
• Ìçí êáèáñßæåôå ìå õëéêÜ ôá ïðïßá Ý÷ïõí óçìåßï
áíÜöëåîçò ÷áìçëüôåñï áðü 70° F (21° C).
×ñçóéìïðïéåßôå ìüíï õëéêÜ ìå âÜóç ôï íåñü
Þ õëéêÜ ôýðïõ äéáëýôç ðåôñåëáßïõ. Ãéá
ïëïêëçñùìÝíåò ðëçñïöïñßåò ó÷åôéêÜ ìå
ôï ñåõóôü óáò, æçôÞóôå ôï MSDS (Äåëôßï
Óôïé÷åßùí Áóöáëåßáò Õëéêþí) áðü ôïí äéáíïìÝá
Þ ôï êáôÜóôçìá ðþëçóçò ôïõ ñåõóôïý.
• ÅÜí êáôÜ ôç ÷ñÞóç ôïõ ðáñüíôïò åîïðëéóìïý
ðáñáôçñÞóåôå óðéíèçñéóìü áðü óôáôéêü
çëåêôñéóìü, äéáêüøôå ôç âáöÞ áìÝóùò.
Åíôïðßóôå êáé åðáíïñèþóôå ôï ðñüâëçìá.
• Áðïöåýãåôå üëåò ôéò ðçãÝò áíÜöëåîçò, üðùò
ëõ÷íßåò êáèïäÞãçóçò, ôóéãÜñá êáé ðëáóôéêÜ
õöÜóìáôá (êßíäõíïò äçìéïõñãßáò óôáôéêþí
ôüîùí).
• Ìç óõíäÝåôå Þ áðïóõíäÝåôå ôá êáëþäéá
ðáñï÷Þò éó÷ýïò êáé ìçí áíÜâåôå Þ óâÞíåôå
öþôá óôï ÷þñï ôçò âáöÞò.
• ×ñçóéìïðïéåßôå áðïêëåéóôéêÜ óùëÞíåò âáöÞò
ôçò Graco.
3X9478E
WARNING
Fire, Explosion and Electrocution Hazard
Improper grounding, poor air ventilation, open flames, or
sparks can cause a hazardous condition and result in
fire, explosion, or electric shock.
To help prevent these hazards:
• Sprayer should be grounded through an electrical
outlet as follows:
- Only use grounded electrical outlets.
- Only use 3-wire extension cords.
- Grounded prongs must be intact on sprayer and
extension cords.
• Keep electrical connections and inside of shroud
dry.
• Avoid contact with power lines.
• Use outdoors or in well-ventilated area.
• Sprayer should be at least 6m (20 ft) from gun
when spraying or flushing.
• Do not clean with materials having flash points
lower than 70° F (21° C). Use water-based material
or mineral spirits-type material only. For complete
information about your fluid, request the MSDS
from the fluid distributor or retailer.
• If there is any static sparking while using
equipment, stop spraying immediately. Identify
and correct the problem.
• Avoid all ignition sources such as pilot lights,
cigarettes and plastic drop cloths (static arc
hazard).
• Do not plug in or unplug power cords or turn lights
on or off in spray area.
• Only use Graco airless paint hoses.
Ðñïåéäïðïßçóç
3