Idiomas disponibles
Idiomas disponibles
You must not connect other appliances to
the same mains socket as this appliance.
Keep the appliance clean at all times, and
never insert objects in the air intake or the air
outlet, as this may cause electrical shock, � re
or damage to the appliance.
Not for use in rooms less than 4 m
The appliance is not suitable for use outdoors
in damp weather, in bathrooms or in other
wet or damp environments.
Unplug the appliance prior to cleaning.
The
symbol means that the appliance
must not be covered.
Never pull on the cord.
Caution: If the cord is damaged, it must be
replaced by a quali� ed repairman to avoid
hazards.
Children must not play with the appliance,
and cleaning and maintenance must not
be performed by children unless they are
supervised.
Keep children and pets away from the
appliance when it is turned on, as it will get
very hot.
The appliance must be kept out of the reach
of children under 3 years of age unless they
are kept under constant supervision.
Children between the age of 3 and 8 may
only switch the appliance on and off if it
has been positioned or installed in the
intended normal operating position, and
they are monitored or instructed in safe use
of the appliance and they understand the
associated risks.
Children between the age of 3 and 8 must
not plug the appliance into a power socket
or control the appliance.
16
Caution: Some of the parts of the appliance
may get very hot and so represent a risk of
burning. Be aware of this when children or
in� rm people are nearby.
Always unplug the appliance when not in
use.
.
2
Use
Position the fan heater so that it stands
vertically on a � rm surface and at a safe
distance from wet environments and
� ammable objects.
Connect the fan heater to the mains.
Set the thermostat dial (1) to the maximum
temperature.
Turn the fan heater on by turning the
function selector (1) to the fan without heat
position (fan symbol), 1,000 W fan heating
(I) or 2,000 W fan heating (II). The indicator
light (4) will come on when the fan heater is
switched on.
Once the room reaches the required
temperature, you should turn the thermostat
dial anticlockwise until the fan heater
switches off with a little click. The fan heater
now starts and stops automatically, thus
keeping the room temperature constant.
Before turning the fan heater off , run it on fan
without heat for 3-5 minutes so that it can
cool down.
Turn the fan heater off by turning the
function selector to 0.
Note! The fan speed is constant and
independent of the thermostat setting.
During the � rst few minutes of operation, the
fan heater may give off a slight smell. This is
normal and will soon pass.
