SOMFY Roll Up 28 WF RTS II Instrucciones página 5

Idiomas disponibles

Roll Up 28 WF RTS II

2.INSTALLATION

CAUTION

• These instructions are mandatory for the home motorisation and

automation professional installing the drive.

• Never drop, knock or puncture the drive or immerse it in liquid.

• Install an individual control point for each drive.

NOTICE

Make sure that LED, programming button and input connection remain visible and

easily accessible after installation.

2.1.Assembly

2.1.1.Preparing the drive

CAUTION

Roll Up 28 WF RTS II : interior diameter of the tube has to be Ø26.6 mm or

greater.

1] Fit the crown (a) and drive wheel (b) to the

motor.

2] Measure the length (L) between the end of

the drive wheel and the head end.

2.1.2.Preparing the tube

1] Cut the tube to the required length.

2] Deburr the tube and remove the debris.

(a)(b)