Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
ELECTRONIC MODULE
DISPLAY FUNCTION
1 - Rotation per minute display - 0 ~199.
2 - Speed Display - 99.9 km/h or ml/h.
3 - Time Display - 00:00 ~ 1:59:59.
•Count up - No preset target, time will count from 00:00 to 1:59:59 in 1 minute increments.
•Countdown - The console will count down from the preset time to 00:00:00 with a preset 1 minute increment or decrement
between 00:01:00 and 1:59:00.
4 - Distance - Accumulates the total distance from 0.0 to 999.9 km/h or ml/h or counts down from the preset value. The user can
preset the target distance value with the UP / DOWN key (KEYS 10 or 11). Increment is 1.0km/h or ml/h.
5 - Calories Display - Accumulates calorie consumption or counts down during training from 0 to 999 calories. The user can preset
the desired calories with the UP / DOWN key (KEYS 10 or 11).
6 - Watts Display - Display power consumption during training - 0~1999.
7 - Heart Rate Display - User can set the target heart rate value from 0 ~ 30 to 230 the console will emit an audible alert when the
actual heart rate exceeds the target value during exercise.
KEYS FUNCTION
8 - START key: To start training quickly or resume it.
9 - STOP key.
•To stop/pause training.
•Clear All Settings
•Hold the key for 2 seconds to reset the console.
10 - Up adjustment key, adjustment of DISTANCE, CALORIES, HEART RATE, TIME and AGE.
11 - Down adjustment key, adjustment of DISTANCE, CALORIES, HEART RATE, TIME and AGE.
12 - Quick access key to the TARGET DISTANCE training mode.
13- Quick access key to TARGET CALORIES training mode.
14 - Quick access key to TARGET HEART RATE training mode.
15 - Quick access key to TARGET CALORIES training mode.
16 - Quick access key to INTERVAL training mode.
17 - Quick access key to 20/10 INTERVAL training mode
18 - Quick access key to 10/20 INTERVAL training mode.
19 - Key to con rm the settings or enter the program.
PROGRAMS
When ON, the LCD will display for 2s (Figure 1) an audible alert and then display the wheel diameter 1s in the DIST area (Figure 2).
Then enter the AGE setup mode, the AGE ashing to be set (Figure 3). Press UP / DOWN (KEY 10 or 11) to set the age and press
ENTER (KEY 19) to con rm the console will go into standby mode.
The INTERVAL 20 / 10 Display, INTERVAL 10 / 20, ADJUSTABLE INTERVAL, READY, WORK, REST, TIME, DISTANCE,
CALORIES, WATTS, SPEED, RPM and
signal or pulse signal for 60s, the console goes into standby mode.
FIGUR 1
E
will ash in sequence every 1s (Figure 4 to Figure 16). If there is no input on the keys or RPM
♥
FIGUR 2
E
24
FIGUR 3
E
