Idiomas disponibles
Idiomas disponibles
effect may be poor if the spin speed is too low. Please increase the time of rinse.
5. When the washing machine starts up after a power failure, it runs from the time node before the power
failure.
6. Cold Water is not displayed on the screen.
MAINTENANCE AND SERVICING
•
After using for a long time, you can make some service. Good servicing practices may extend the
service life of the washing machine.
•
Before servicing, please unplug the power plug to avoid dangers from happening.
Body
Please wipe the body with a soft and clean cloth
every time after the washing machine is used. When
there are serious stains, please wipe the body with a
cloth dipped in appropriate detergents or soapy
water.
• Do not spray water on the body directly.
•
Do not wipe the body with chemicals such as
putty-powder, diluting agents, gasoline and
alcohol.
Door seal
Please wipe stains and foreign matters such as
thread chips away with a towel every time after using.
If there are foreign matters such as pins in the groove
of the door seal, please take them out.
If the washing machine is frozen
1. Wrap the faucet and the universal coupling with a hot towel.
2. Remove the water supply hose and immerse it in hot water at the temperature of approximately 50
3. Pour 2~3 liters of hot water at the temperature of approximately 50
4. Connect the water supply hose again, turn on the faucet, start up the washing machine, and check
whether or not the water supply and drainage are normal.
Cleaning the detergent compartment
To prevent detergents becoming moldy on the
wall of the detergent compartment, please
clean the detergent compartment regularly.
•
Press the specified position and pull out the
detergent compartment, wash it with water
and put it back.
0
C into the drum.
63
0
C.
