Idiomas disponibles
Idiomas disponibles
2.4
MANUFACTURER'S IDENTIFICATION LABEL DESCRIPTION.
2.5
INSTALLATION AND ASSEMBLY
Avoid having direct sources of heat, cold, humidity, sunlight and ultraviolet rays in the fi nal location of this
appliance. Heaters, radiators, air conditioning, etc. can have a negative infl uence on the correct operation
of the same.
Make sure the fl oor is level, in this way preventing any vibration or noise.
2.6
CONNECTIONS (ELECTRIC, GAS, WATER)
Once the tray has been fi tted into the hole in the furniture destined for this purpose, the anchoring is carried
out by means of the anchoring supplied as shown in the illustration below.
The control box located on the lower part of the appliance can easily be moved to the side of the technical
cabinet if required (for example in the case of having the front access of the appliance closed due construc-
tion reasons of the furniture housing it.
At the same time, it can be removed from its technical cabinet and installed in any other panel (for example,
at the buffet front in order to operate and regulate the appliance without having to open the door).
The fl exible connection pipe with a 1/2" stopcock valve on the end should be connected to the water inlet
provided for the same.
In order to connect the drainage, the rigid rube supplied with the appliance (including a ¾" stopcock valve)
should be previously screwed to the tray drainage valve, which can be accessed through the slot provided
for this purpose inside the technical box.
4
edenox.com
Data in the identifi cation label:
Serial number (code+year+serialnumber)
Code:
Model: CBMA
CE symbol
Waste disposal symbol
Manufacturing site
Climate Class
Working range temperature
Voltage
Power consumption
VACIADO
LLENADO
ENGLISH
