Zipro Beat RS Manual De Uso página 12

2. Install the right and left pedal
Screw the left and right pedal (9L/R) to the crank (10). Screw the right
pedal bolt (9R) on clockwise. Screw the left pedal bolt (9L)
counterclockwise.
NOTE! The right pedal is marked 'R' and the left pedal is marked 'L'.
See how to complete this step.
Scan the
3. Install the saddle
Fix the saddle (7) and a towel holder (38) to the saddle post (6) using flat
washers (33) and the nylon nut (26).
Next, fix the saddle post (6) to the main frame (1), securing it with the
saddle post knob (31).
NOTE! Do not exceed the maximum and minimum height on the post
when adjusting saddle post height.
NOTE! Before using the device, make sure the saddle is stable in the
guide.
4. Install the handlebar column
Connect computer cables (17) and (18).
Set the resistance knob so that line (16) from the handlebar post is the
longest.
Connect resistance adjustment cables as shown.
The upper cable should be held in the bracket of the lower cable (16).
Insert the end of the upper cable into the bracket slit in the lower cable.
Tension the upper cable and set it to lock its nut on the upper part of the
bracket.
See how to complete this step.
Scan the QR code and watch the video.
EN
12