General Characteristics - Cembre B500-TFC Manual De Uso Y Mantenimiento

1. GENERAL CHARACTERISTICS

Application range
Operating pressure
Dimensions (L x H x W)
Weight with battery
Motor
Operating temperature
Recommended oil
Operating speed
Safety
Rechargeable battery
Weight
(1)
Acoustic noise
(2)
Vibration
(1)
Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u
L = weighted continuous acoustic pressure level equivalent.
pA
L = maximum value of the weighted acoustic displacement pressure at the work place.
pCPeak
L = acoustic power level emitted by the machine.
WA
(2)
Directive 2006/42/EC, annexe 1, point 2.2.1.1
Weighted root mean square in frequency of the acceleration the upper limbs are exposed to for each biodynamic
reference axis. Tests carried out in compliance with the indications contained in EN ISO 5349-1/2 and UNI EN 28662-1
Standards, and under operating conditions much more severe than those normally found.
Battery charger ASC30-36
Input
suitable for cutting grooved contact wires and
conductors used on electric traction systems
bar (psi)
mm (inches)
kg (lbs)
V DC
°C (°F)
twin speed operation with automatic switching from a rapid
ram advance speed to a slower, more powerful cutting speed
type
V / Ah (Wh)
kg (lbs)
dB
m/s 2
B500-TFC B500-TFCE B500-TFCT B500-TFCA
type EU
27044000
V / Hz (W)
729 (10,573)
298 x 382 x 93 (11.7 x 15 x 3.7)
5 (11)
18
-15 a +50 (+5 a +122)
AGIP ARNICA 32 or equivalents
maximum pressure valve
CB1840L Li-Ion
18 / 4.0 (72)
0,66 (1.45)
L 73 (A) L 94,5 (C)
pA pCPeak
0.575 max.
UK
27045000 27047000
220 - 240 / 50 - 60 (85)
L 79 (A)
WA
AUS/NZ USA/CAN
27046000
115 / 60 (85)
6