Idiomas disponibles
Idiomas disponibles
CORDLESS FOOD CHOPPER
9
3. Please use the original USB cable of the product for charging. If the original one is lost, please
use the type C USB cable which can bear the current of 1.5A for charging.
PRODUCT OVERVIEW
HOW TO USE THE FOOD CHOPPER
The operating method of the cordless food chopper is the same as that of other food chopper, but
you can enjoy the space more freely since it is cordless.
1. Before using the product, please make sure the battery is fully charged and the parts in contact
with the ingredients are thoroughly cleaned.
2. Put the glass bowl on the anti-slip coaster.
3. Insert the blade set on the fixed shaft at the buttom of glass bowl.
4. Put ingredients in the glass bowl and cover with the middle shelf.
5. Align grooves at bottom of the host with convex sockets in the middle shelf, then install them to
the glass bowl .
6. After accurate installation, lightly press the button on the top of the host with hand, and the
product starts to work.
7. Press Key I for easily cut ingredients such as vegetables; Press Key II for tougher ingredients
such as meat.
8. After the work, release the button to turn off the power; open the middle lid, carefully take
out the blades, then fetch food out the bowl. (Do not handle food by hand without removing the
blades).
9. Do not use the product for a long time, the longest time for a single blending work should not
exceed 20s. If working time exceeds 20s, the program will start automatic protection and stop
working, you can re-start it again after several seconds. It will rest for 5 minutes after 5 continuous
working circles for sufficient heat dissipation.
10. After fully charged, the product can work for 20+ times, at each time 20s.
Note: We suggest to cut the food in size less than or equal to 30mm* 15mm* 15mm, otherwise the
blade will be easily stuck. And not to grind dry soybeans, rice, frozen meat, liquid food materials
with high water content by the product.
