Idiomas disponibles
Idiomas disponibles
CORDLESS FOOD CHOPPER
10
INSTRUCTIONS FOR INDICATOR
Indicator light description during working:
There are 4 indicator lights inside the strip on the host, during the working of Chopper, the
indicator lights will turn off from 4 to 1 indicates the remaining of power. If the battery level is less
than 25%, the bottom 1 indicator light flashes, indicating the product is in a low power state, and it
may shut down at any time and needs to be charged immediately.
OVELOAD PROTECTION
The Cordless Food Chopper has an automatic protection system and does not allow overload.
If the load is too heavy, it will automatically power off. In the case of overload, the 4 indicator
lights will stay on for 5s and then go out. When the indicator lights flash, the button is invalid. You
must wait the indicator lights go out before returning to the working state. At this time, reduce the
volume of food and re-start the product again.
OVERHEAT PROTECTION
When the temperature is ≥65°, the motor will stop working, and the 4 indicator lights will stay
flashing. In this case, we suggest to let the product rest for 15 minutes to cool down and re-start it
again.
LOW-VOLTAGE ALARM FUNCTION:
If the battery voltage is less than or equal to 8.7V, the bottom indicator light will automatically turn
off after 5 flashes, and then the product will automatially stop working. Please charge the product
immediately for 3.5-4 hours and re-start it again.
CHARGING PRIORITY FUNCTION:
When charging, the circuit stops working and priority is given to charging. The product does not
work when charging.
HOW TO CHARGE THE PRODUCT
1. Open the charging port on the product, insert one end of USB cable port into the charging port,
and insert the other end of USB cable port to the power source.
2. The indicator flashes when charging. When the product is fully charged, the indicator stops
flashing and to be all on. See the indicator section for more details.
3. The product can be fully charged in 3.5-4hours.
Note: The battery power is about 50% when the product left factory. It is suggested to charge
adequately before first use for optimal performance.
