ProMed nailfan mini Instrucciones De Empleo página 11

Idiomas disponibles

OPERATING THE UNIT

Make sure that the power adapter is connected to an easily accessible socket.

A. Preparation for commissioning

Remove the device from the cardboard packaging. One filter (D) has already been inserted.

B. Connecting the device

Connect the power adapter plug (B) to the power adapter socket (C) and the power adapter (A)

to the mains socket. The on/off power switch (E) is in the "0" position.

C. Operating the device

To start your Promed nailfan mini table extraction, switch the on/off power switch (E) to the

"I" position (extraction level 1) or the "II" position (extraction level 2).

When working with the device, the personal hygiene precautions

according to the relevant laws and regulations must be observed.

D. Cleaning / replacing the filter

• Before carrying out cleaning work or replacing the filter, the device must be switched off!

• To protect yourself against potential contamination with fungal spores, bacteria or viruses,

personal hygiene precautions according to the relevant laws and regulations must be observed

when replacing the filter or cleaning the device. This includes using a face mask, disposable

gloves and disinfectants (a VAH- / DGHM-approved hand disinfectant for the hands and a

VAH- / DGHM-approved surface disinfectant for the device or the components of the device

(e.g. Promed Pure-FD)).

• When replacing the filter, ensure adequate ventilation of the room.

• To replace the filter (D), remove the filter from the device by pulling the protruding black lug.

MAINTENANCE AND CARE

• The housing may only be cleaned using a damp cloth. Do not use any cleaning agents

containing solvents, acetone or acid. Only use clear water.

• To disinfect the device or the components of the device, only suitable, VAH- / DGHM-approved

surface disinfectants (e.g. Promed Pure-FD) may be used.

• The filter (D) may be beaten or vacuumed. We recommend cleaning the filter after every

second customer.

• Pay utmost attention to the generation of noise and/or development of heat.

• If the device is damaged, return it for repair.

• The power adapter cable must be checked for damage, such as breaking or ageing, at

regular intervals. If any damage has been detected, the power adapter must be replaced

before further use.

In the case of malfunctions:

• Check that the power supply is correct.

• If the problems cannot be solved with these measures, please contact your service centre.

Kaitstud / Secured by https://mereneid.eu/