Idiomas disponibles
Idiomas disponibles
EN
•
If parts of the machine are damaged, do not use the
machine.
•
If you do not have all the parts, do not operate the
machine.
•
If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
For your personal safety, do not insert battery before the
tool is assembled completely.
8.2
INSTALL BELT CLIP
The belt clip may be installed on either side of the housing.
1. Remove the battery pack from the machine.
2. Align the belt clip with the hole on the stapler.
3. Tignten the screw.
WARNING
WARNING
NOTE
English
8.3
LOAD STAPLES
Remove the battery pack.
1. Hold the tool upside down. Squeeze the magazine latch
and slide the magazine open.
2. Insert the staples into the channel with the crown side
down and the legs facing upward.
3. To close the magazine, push it into the tool until it clicks.
4. An indicator window on the side of the tool lets the
operator know when the tool is running low on staples.
8.4
INSTALL THE BATTERY PACK
8
NOTE
