Idiomas disponibles
Idiomas disponibles
Step 4. Start inflating
Place the inflator on flat surface. Press the Start /Pause button
inflating. The display screen will show the real-time pressure. When the tire
reaches the preset pressure, the inflator will automatically stop inflating.
•
During inflation, you can also manually stop inflation by pressing the
Start/Pause button
Step 5. Disconnect the inflator
Disconnect the air hose and adapter
from your tire or ball, then tighten the
dust cap back in place.
Turn your inflator off, and allow it to
cool for a few minutes (During the
cooling process, do not unscrew the
air hose from the inflator, so you don't
touch the heated air hose connector.).
· During inflation, we suggest you touch the inflatables to check its status from
time to time.
· If the tire or ball is overinflated by accident, you'll need to deflate. To deflate,
you just connect the air hose to the inflatables, and wait until it deflates.
Using the flashlight
· When you inflate at night, you can press the Flashlight button
the flashlight on. There are two light modes available. Repeatedly press the
Flashlight button
change as follows: OFF-Steady light - Flash light -OFF.
NOTES:
· When inflation is completed, please quickly remove the air hose and the
valve adapter from your inflatables to avoid air leaking.
· The pressure required by balloons, pool floats, or other children's toys may
be lower than the pressure minimum of the inflator, and the inflator won't
automatically stop even when the inflatable is fully inflated. You can try to
manually inflate these items by press the
· The inflator will keep the last set pressure unit and the pressure the next time
it is turned on.
· If the sealing ring on the air hose gets degraded or damaged in any way,
please replace it with a new one.
, and press again to continue.
to set your desired light mode. The light modes will
EN 5
Tire
Start/Pause button
to start
Air Hose
to turn
.
