Idiomas disponibles
Idiomas disponibles
2
Charging
2-1 Charging your inflator
Connect one end of the included Type C charging cable to the Type-C charging
port of the inflator. Then connect the other end to a USB power source.
Status Indicator Light
NOTE: It takes about 2.5 hours to fully charge the inflator.
3
Powering on / off
To power on the inflator, press the Power button
screen will turn on and the status
To power off the inflator, press the Power button
The display screen and the status indicator light will be turned off.
NOTE: If there is no use within 3 minutes of the inflator being powered on, it
will automatically power off.
4
Inflating
Step 1. Connecting the inflator
Note: Before connection, put the sealing rings on the inflating connectors of
the included air hose and your inflatables.
1. Screw one end of the included air hose into the air hose port of your inflator.
2. Take the dust cap off the tire you're inflating (car, bike etc). Screw the
other end of the air hose onto the valve connector on the tire, and ensure it is
properly connected, without overtightening it.
Charging
Fully charged
indicator light
EN 2
Steady red
(Status indicator Light)
Steady green
(Status indicator Light)
for 1 second. The display
will turn orange.
for 1 second again.
