Idiomas disponibles
Idiomas disponibles
EN
• Example 1 - set one or three (at most) time-range at comfortable level, then follow steps as below:
Touch
or
. The display
shows number 1 (1st working-hour) and
flashes. Now you can
use the
/
buttons to set the start time between 0-23 o'clock. Confirm your selection with the Timer
button. Press the
button to set the end time (at least 1 hour higher than the start time) and confirm your
selection with the Timer button.
The Display
will show the number 2 (for the second hour of operation). Now you can set one more time
range as described above.
Once the settings for the first day have been completed, the icon 2 will flash on the display. Now you can make
the time settings for the other days of the week as described above.
• Example 2: Please press the Timer button (instead of
/
buttons) to set the comfort mode for the
selected day.
Note: Each step must be taken within two minutes, otherwise the setting will be cleared.
• Anti-frost mode: the room temperature is maintained at 5°C to prevent frost formation.
• Comfort mode: comfortable room temperature, which is achieved with temperature and heating level
settings as required.
24 H TIMER:
• In P1 mode, touchtimer button twice quickly to activate 24 hour timer setting. The icons
will flash on the
display. Please set the desired off time between 0 and 24 hours with the
/
buttons. After five seconds
the settings will be saved (symbols will stop flashing) and the display will show the ambient temperature and
the timer countdown.
• Touch timer twice quickly again to cancel the setting. Screen
will turn to show room temperature.
CHILD LOCK FUNCTION:
• In working mode, touch
and
at the same time for 3 seconds to activate child lock function, the
[ ]
display will show
after setting and will recover to initial display in 5 seconds. Other function is invalid once
[ ]
child lock function works. Once a button is touched, screen will flash
to remind you child lock function is
working and recover to initial display in 5 seconds.
• Touch and at the same time for 3 seconds again cancels child lock function.
INTELLIGENT OPEN WINDOW DETECTION:
Long press
for 3 seconds to switch on open window detection mode. The symbol
flashes on the
display. To cancel open window mode, press button
again.
• When room temperature drops 5°C within 10 minutes, while the heating function is activated, the unit will
consider this as an effect of an open window. After 30 minutes, the room temperature is measured again. If the
room temperature is the same or lower than before, the heating function is deactivated. The symbol
is
shown permanently on the display.
• Once you have closed the window, please press the button
again to reactivate the function. The symbol
will flash again on the display.
17
