Idiomas disponibles
Idiomas disponibles
EN
INSTALLATION
FIXING TO THE WALL
1. Choose a wall on which there is enough space.
2. Use the enclosed template to mark the holes to be drilled on the wall. Use a Φ6 drill to drill 4
holes.
3. Fit the plugs from the accessory bag in the holes.
4. Detach the up-hook from the back of the appliance and put it in the position of the two pegs at
the top. Fix the up-hook on wall with two ST4X35 screws.
5. Insert the two filters in the left and right card slot, tighten them with two ST3X10 screws.
6. Put the two Z wall hanging brackets on the back of the appliance with two M4X8 screws, put the
small towel rack into the fixed slot and lock with four M4X16 screws, and then put the big towel
rack into the fixed slot and lock with four M4X16 screws.
7. Assemble the appliance on the up-hook, tighten two M4X10 screws on the right side and two
M4X10 screw on the left side to fix the appliance (two people to assemble).
8. Fix the Z wall hanging brackets on the wall with two ST4X35 screws.
(Check installation diagrams at the end of the manual)
13
