Idiomas disponibles
Idiomas disponibles
7.7
EXTENDED USAGE
10
6
4 2
WARNING
This shear can be used in conjunction with telescopic a
shaft , which is available as accessory for comfortable
operation that only suits for cutting grass.
WARNING
Please plug the connector according to the direction of the
icon on the plug cover. Otherwise, the plug will be
damaged.
1. Open the plug door (10) on the socket.
2. Plug the connector for telescope shaft (5) into the socket
outlet (6).
3. Push forward the grass shear into the socket on the rear
side of the handle.
4. Press the lock-off button (4) and hold while actuating the
on/off switch (2) to start the machine.
5. Release the On/Off switch (2) to stop the machine.
6. Press the release button under the socket of the handle to
remove the grass shear.
English
5
11
8
OPERATION
WARNING
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
8.1
START THE MACHINE
4 2
1. Press the lock-off button (4) and hold while actuating the
on/off switch (2).
8.2
STOP THE MACHINE
1. Release the lock-off button (4) and the power switch (2)
to stop the machine.
8.3
CUT GRASS
1. Hold the device horizontally to the ground. The blade
should touch the grass. Results are best when the lawn is
dry. Unlock the safety switch, and then depress the
ON/OFF switch to cut the grass.
To avoid serious personal injury, always turn off the
machine before cleaning when the machine was
jammed. use a soft brush to remove debris from intakes
and cutting blade. Then restart the machine.
8.4
TRIM HEDGES
1. The device may be used to trim small hedges and shrubs.
Hold the device in a slight angle to the hedge. First, trim
the lateral areas from the lower to the upper edges, and
then trim the upper edge.
9
MAINTENANCE
WARNING
Switch off before adjusting or cleaning. The blade continues
to move for a few seconds after the deivce is switched off.
9
NOTE
EN
