Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFETY INSTRUCTIONS
Read and understand all warnings and operating instructions before using any tool or equipment.
When using tools or equipment, basic safety precautions should always be followed to reduce the risk of
personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious
injury and property damage. There are certain applications for which tools and equipment are designed.
PORTER-CABLE strongly recommends that this product NOT be modified and/or used for any application other
than for which it was designed.
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING
PROBLEMS. The symbols below are used to help you recognize this information.
indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
indicates a potentially haz ard ous situation which, if not avoided, may result in minor or mod er ate injury.
indicates a practice not related to personal injury which, if not avoided, may result in property damage.
NOTICE
SAFETY RULES
Failure to follow these rules may result in serious personal injury.
To reduce the risk of injury, keep both hands on handle when raising and lowering the stand. The stand has
gas assist lifting and may raise unexpectedly when lever is released.
1.
This product was designed to be used as a stand for
miter saws and planers. The stand will support up to
300 lbs (136 kg). Any misuse or abuse can result in product
damage or personal injury.
2.
Do not stand on the work table. It is unsafe to climb, sit or
stand on the stand. Do not use the support extensions as a
ladder or scaffolding.
3.
Properly secure the miter saw or planer to the stand
before operation. Follow the mounting instructions carefully.
Fasten the tool to the saw mounting rails securely as instructed.
4.
Place the stand on a flat and level surface to prevent
rocking or tipping.
5.
Take care during the raising and lowering of the product
to reduce the hazard of pinching hands and fingers.
FUNCTIONAL DESCRIPTION
FOREWORD
The Model PC136MS is a stand designed to accommodate most miter saws and planers and to provide portability for those units, both in
the field and in the shop. If you have any problem with alignment or mounting, call (888) 848-5175.
NOTE: The illustration on the manual cover illustrates the current production model. All other illustrations contained in the manual are
representative only and may not depict the actual labeling or accessories included. These are intended to illustrate technique only.
CARTON CONTENTS
A
D
B
SAVE THESE INSTRUCTIONS
D
C
6.
Check the legs and other supports to see that they are
properly locked in place before operation.
7.
Do not modify or use the stand for any operation for which
it is not intended.
8.
ALWAYS use eye protection. All users and bystanders must
wear eye protection that conforms to ANSI Z87.1.
9.
ALWAYS use safety glasses. Everyday eyeglasses are NOT
safety glasses. Also use face or dust mask if cutting operation is
dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
•
ANSI Z87.1 eye protection (CAN/CSA Z94.3),
•
ANSI S12.6 (S3.19) hearing protection,
•
NIOSH/OSHA/MSHA respiratory protection.
A.
Stand
B.
Leg Extension
C. Storage Foot
D. Wheel/Storage Foot
Connector (L & R)
E.
Extension Work
Support Assembly (2)
F.
Handle
G. Wheel (2)
H. Axle (2)
I.
Work Support Arms
[2 (1 with black cap)]
J.
Cord Wrap
Brackets [2 (L, R)]
K.
M8 x 15 mm Button
head Screw (6)
L.
M8 x 20 mm
Button head
Screw with thread
locking patch (1)
2-ENG
E
H
I
F
G
