Idiomas disponibles
Idiomas disponibles
To tighten the straps at shoulder height: Pull on the
end of the TMS strap until it is tightened (fig. 5 / A).
To untighten the safety harness: With one hand
push down on the TMS regulator located at the
front of the car seat, in the direction of the
arrow (fig. 5 / B), and with the other hand,
simultaneously pull the shoulder straps toward you.
IMPORTANT: The safety harness should be tightened
firmly but must not restrict the child's movements.
Check that the straps are not twisted. The harness
buckle should be situated as low as possible on the
child's abdomen and never on his stomach. This is
to ensure adequate pelvic protection.
Installing the child in the RC/RCS car
seat
WARNING: NEVER leave a child unattended in his
car seat.
IMPORTANT: It is recommended that you adjust the
length of the harness to the child's size BEFORE
installing the car seat in the car. The harness straps
must go through the slots nearest to the child's
shoulders.
• Put the handle in position 1 (fig. 6).
• Release the harness buckle by pressing on the red
GB
button.
• Sit your child comfortably in the car seat with his
back firmly against the rear of the seat.
• Adjust the position of the seat back (see chapter
"adjusting the seat back and handle positions").
• Assemble the 2 parts of the buckle together and
insert them into the fastener.
• Adjust the harness to fit your baby (see chapter
on "adjusting the harness ").
Head Hugger (Sun shade)
The RC/RCS car seat includes a 3 function Head
Hugger – it reduces the car seat size, it cushions the
baby's head, it protects from the sun.
The Head Hugger provides extra comfort when baby
is lying down and lateral support for baby's head ad
upper body. As he grows, remove the padding and
use it as a simple head hugger and sun shade
(unfolds and closes with the zip).
Unfolded
as sun
shade
Adjusting the seat back and handle
positions
• To adjust the seat back (fig 7):
23
All manuals and user guides at all-guides.com
Folded
back
Lift up the lever situated at the rear of the car
seat and choose the position best suited to your
baby's weight:
3 POSITIONS
Lying
Reclining
Traditional
NB: When not used in the car, all three positions
are possible up to 9kgs.
• Handle positions (fig. 6):
There are 3 handle positions.
To change position, release the handle position by
pushing down simultaneously on the buttons at
either side (fig. 6A) while at the same time
moving the handle forwards or backwards, to the
required position.
1. Position when used in the car
2. Position when carrying baby
3. Position when used as a rocking chair / on the
stroller
IMPORTANT: Remain vigilant at all times! - If you
carry baby in his RC/RCS car seat outside of the
vehicle, check that the handle is enclenched firmly
in position 2.
Optional accessories
Attaching the Hood
• To attach the hood: Insert the plastic attachments
located either side of the hood into the side
sockets of the RC/RCS car seat (figs a1+a2).
• Line up the openings, indicated by the blue
arrows (located at the rear of the hood), with
the guides for the car seat belts (figs a3 + a4).
• Adjust the hood as required in order to protect
your baby from sun.
• To remove the hood: push down on the plastic
attachments at either side of the hood, at the
same time pulling the end of the hood upwards.
Attaching the Apron
Before attaching the apron, attach the hood (see
previous chapter).
• Cover the RC/RCS car seat with the apron
(fig.a5).
• Match the velcro straps and the press studs of the
apron and the hood with those on the car seat
cover. Press them to close them.
• To remove the apron, detach the Velcro and undo
the press studs.
- 5 kg
- 5 kg
5 <10 kg
