Idiomas disponibles
Idiomas disponibles
13. Storage unit
14. USB-A port (5 V/0.75 A)
15. USB-C port (5 V/0.75 A)
Operation
1. IMPORTANT! Use only the mains adapter provided to power the wireless charger.
2. Plug the mains adapter (included) into a standard wall outlet
3. Plug the connector of the mains adapter into the power input port of the wireless charging
station.
4. After the product is powered on, the alarm clock screen lights up, and the product's blue
and white LED charging indicators light up alternately, and the white light stays on.
Instructions for installing the storage unit for wirelessly charging a connected watch
If you have a SE iWatch, please don't use all charging output at the same time.
Step 1: remove the silicone holder from the storage unit and thread the USB/Type C connector
of the smartwatch wireless charger through the hole in the silicone ring.
Step 2: the wireless watch charger is not installed inside the silicone holder, thread both
elements through the hole in the storage unit.
Step 3: fit the silicone ring onto the hole in the storage unit.
Step 4: fit the wireless watch charger into the silicone ring so that it lies flat
Step 5: connect the USB/Type C connector of the wireless watch charger to the USB-A/C port
in the storage unit.
- EN 18 -
