Master BC 60 Manual De Instrucciones Para El Uso Y Mantenimiento página 6

Ocultar thumbs Ver también para BC 60:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
en
►TIMER: It enables or disables the
timer of the appliance automatic
switch-OFF. Intervals can be of half-
hour up to 12 hours.
►►4.3. SWITCHING OFF:
►4.3.1. Press the ON/OFF button to
switch off the appliance (Fig. 9).
►4.3.2. Empty the tank using the drain
cap (Fig. 11-12-13).
►►5. CLEANING AND
MAINTENANCE
WARNING: BEFORE PERFORMING
ANY MAINTENANCE OR REPAIR,
DISCONNECT THE POWER CABLE
FROM THE MAINS.
DEPENDING ON THE ENVIRONMENT
WHERE THE APPLIANCE IS USED,
DUST, DIRT OR WATER QUALITY CAN
AFFECT THE PERFORMANCE OF
THE UNIT. THEREFORE, CLEANING
THE FOLLOWING COMPONENTS
CAN BE NECESSARY:
►►5.1. TANK:
We recommend changing the water
frequently.
►5.1.1. Switch off the appliance and
disconnect the plug from the mains
(Fig. 9-6).
►5.1.2. Remove the drain plug and
empty the vessel, then wash it, using
a soft cloth. Wash away the dirt from
the water sensor, water pump and
float valve. Rinse everything.
►5.1.3. In order to clean the housing,
use delicate soap and a soft cloth. Do
not use any caustic detergents, which
may damage the air conditioner
housing.
►5.1.4. In order to prevent the
accumulation of algae and other
biological organisms in the vessel,
add chlorine or bromine tablets or
Figures and texts of this book are protected by COPYRIGHT.
All manuals and user guides at all-guides.com
►►5.2. FILTERS:
We
frequently.
WARNING: Dirty filters can affect
the performance of the appliance.
►5.2.1. Switch off the appliance and
►5.2.2. Remove the filters upwards
►5.2.3. Clean the filters using a mild
►5.2.4. Place the filter back into its
►►5.3. WATER CIRCUIT:
►5.3.1. To ensure proper operation of
►5.3.2. Once a month we recommend
other tablets recommended by the
manufacturer
regularly,
for the vessels of evaporation air
conditioners.
recommend
disconnect the plug from the mains
(Fig. 9-6).
(Fig. 14).
detergent and a clean cloth (Fig. 15).
Ensure the filter is fully dry.
housing (Fig. 16).
the cooler, turn off COOL mode a few
minutes before completely switching
off the appliance, in order to avoid
stagnant water.
performing
a
using clean water and appropriate
disinfection products, running the
cooler outdoors.
intended
cleaning
filters
complete
cycle
loading