Idiomas disponibles
Idiomas disponibles
WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a PORTER-CABLE
factory service center or a PORTER-CABLE authorized
service center. Always use identical replacement parts.
THREE YEAR LIMITED WARRANTY
PORTER-CABLE will repair or replace, without charge, any defects due to
faulty materials or workmanship for three years from the date of purchase
for tools (two years for batteries). This warranty does not cover part failure
due to normal wear or tool abuse. For further detail of warranty coverage and
warranty repair information, visit www.portercable.com or call (888) 848-
5175. This warranty does not apply to accessories or damage caused where
repairs have been made or attempted by others. This warranty gives you
specific legal rights aand you may have other rights which vary from state to
state or province to province.
In addition to the warranty, PORTER-CABLE tools are covered by our:
Troubleshooting Guide
BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns
For assistance with your product, visit our website at www.portercable.com for a list of service centers, or call the PORTER-
CABLE Customer Care Center at (888) 848-5175.
PROBLEM
-
Unit will not turn ON
-
Battery pack will not charge.
-
Unit shuts off abruptly.
1 YEAR FREE SERVICE: PORTER-CABLE will maintain the tool and replace worn
parts caused by normal use, for free, any time during the first year after purchase.
90 DAY MONEY BACK GUARANTEE: If you are not completely satisfied
with the performance of your PORTER-CABLE Power Tool for any reason, you
can return it within 90 days from the date of purchase with a receipt for a full
refund – no questions asked.
LATIN AMERICA: This warranty does not apply to products sold in Latin
America. For products sold in Latin America, see country specific warranty
information contained in the packaging, call the local company or see website
for warranty information.
To register your tool for warranty service visit our website at www.portercable.com.
WARNING LABEL REPLACEMENT
If your warning labels become illegible or are missing, call (888) 848-5175 for
a free replacement.
POSSIBLE CAUSE
-
Battery pack not installed
properly
-
Battery pack not charged.
-
Internal componets too hot.
-
Cord not plugged in.
-
Circuit breaker is tripped.
-
Cord or switch is damaged.
-
Battery pack not inserted into
charger.
-
Charger not plugged in.
-
Surrounding air temperature
too hot or too cold.
-
Battery pack has reached its
maximum thermal limit.
-
Out of charge. (To maximize
the life of the battery pack
it is designed to shut off
abruptly when the charge is
depleted.)
4825 Highway 45 North, Jackson, Tennessee 38305
(888) 848-5175 • www.portercable.com
POSSIBLE SOLUTION
-
Check battery pack installation
-
Check battery pack charging
requirements.
-
Allow tool to cool down.
-
Plug tool into a working outlet.
-
Reset circuit breaker. (If the
product repeatedly causes
the circuit breaker to trip,
discontinue use immediately
and have it serviced at an
authorized PORTER-CABLE
service center.
-
Have cord or switch replaced
at an authorized PORTER-
CABLE service center
-
Insert battery pack into
charger until LED illuminates.
-
Plug charger into a working
outlet. Refer to "Important
charging notes" for more
details.
-
Move charger and battery
pack to a surrounding air
temperature of above 40
degrees F (4,5°C) or below 105
degrees F (+40,5°C).
-
Allow battery pack to cool
down.
-
Place on charger and allow to
charge.
English
9
