RISCO Group LightSYS Manual De Instalación Y Programación página 224

Teclas
 
 
 
 
 
Parámetro
Parpadeo
[ProSYS [8][2] [2]]Defines the number of times that the strobe will
blink in a minute.

20 [Veces/Min]

30 [Veces/Min]

40 [Veces/Min]

50 [Veces/Min]

60 [Veces/Min]
Arm Squawk
[ProSYS [8][2] [3]]The time that the strobe will blink when the
system is armed.
Note
If the siren's squawk strobe is defined as NO (Refer to the
add/delete module,
definido.this Parámetro will be ignored
LED de Sirena
[ProSYS [8][2] [4]]Defines the operation mode of the Status LED2.

Always On — The status LED2 is always on

Always Off — The status LED2 is deactivated

Follow Arm — The status LED2 is activated when any of the
siren selected partition is armed (Away or Stay mode)

Follow Alarm ‐ The status LED 2 is activated after any alarm
condition
Battery Load Test
[ProSYS [8][2] [6]]Enables you to cancel (

defecto daily ( EVERY 24 HOURS) test
Proximity Level Response
??[ProSYS [8][2] [5]]Defines the time (seconds) for which a
proximity violation must exist before the siren triggers an anti‐
approach alarm. The option 0 indicates that the proximity is
deactivated.
Por defecto
40
01 01‐20 (sg)

page ¡Error! Marcador no
Sigue Armar
EVERY 24 HOURS
3 0‐9 (seconds)
Página 224
Rango

NEVER) the Por