Blancone ARCUS+ FIXED Instrucciones De Uso página 16

GB
VIII. PREPARATION FOR WORK WITH PATIENTS
1. Before starting work with the bleaching device, insulate the patient's non-cal-
cified soft tissue, place a cover or protective napkin on the face, apply pro-
tective UV cream and put on protective glasses. Bleaching gel is applied
to the teeth surface according to the directions for use outlined by the gel
manufacturer.
The patient should be under constant supervision by the dentist during the
bleaching process in order to avoid discomfort and to ensure all safety and
technological procedures are applied.
2. It is desirable to check the individual sensitivity of the patient. The device has two levels of intensity (high
HI and low LO) and the optimal conditions are selected by adjusting the distance of the device to the pa-
tient's teeth.
Testing starts with a high intensity "Hi" and a distance of 5 cm and if the heat sensation is very strong, the
distance is increased to achieve an acceptable thermal sensation.
If the acceptable distance is more than 10 cm, it is better to switch to a mode with low intensity - "Lo" (Low)
and put the bleaching head closer to the teeth to obtain optimal distance.
IX. POSITIONS OF BLEACHING HEAD AGAINST PATIENT'S TEETH
CORRECT
14 LED Bleaching Lamp - FIXED
5-15 cm distance
INCORRECT
TOUCH
STICK
HOME
DAY
CARE
ULTRA
DUETTO
HOME
NIGHT
DUETTO
ACTIVE
CLICK
ARCUS
LIPS
ARCUS
DUETTO
CARE