Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

OPERATOR'S MANUAL
32 IN FLOOR CABINET -- MODEL # 32FC01BP-THD
36-IN FLOOR CABINET -- 36FC01BP-THD
48 IN FLOOR CABINET -- MODEL # 48FC01BP-THD
NOTE: IT IS RECOMMENDED
WITH AT LEAST 2 PERSONS.
SERVICE PARTS
CALL 1-866-440-3170 FOR SERVICE PARTS.
provide the Model Number when calling. To expand your garage
storage project, please visit www.homedepot.com/garagestorage
for additional product options.
Locating Model # Information
Model numbers and other information required for service parts is
located on a white label on the upper right hand corner of the unit.
CAPACITIES
• Empty weight of the 32-in unit is 109 lbs.
• Empty weight of the 36-in unit is 141 lbs.
• Empty weight of the 48-in unit is 148 lbs.
• The maximum load capacity for each shelf is 165 lbs. for the 32-
in unit, 125 lbs for the 36-in unit and 100 lbs. for the 48-in unit
(evenly distributed).
• The maximum product weight including contents stored on the
shelves is 934 lbs for the 32-in unit, 766 lbs for the 36-in unit
and 648 lbs for the 48-in unit.
THAT UNIT IS ASSEMBLED
• Periodically the surfaces should be cleaned with a mild
detergent and water.
• Grease and oil can be removed with most standard cleaning
fluids. For safety, use a nonflammable cleaning fluid.
• Auto wax will preserve the unit's luster finish. Apply the wax as to
a car. The wax will also help protect the unit against scratches.
DANGER
situation which, if not avoided, will result in serious injury
or death.
WARNING
if not avoided, could result in serious injury or death.
CAUTION
which, if not avoided, may result in minor injury, moderate
injury, or property damage.
CAUTION:
Operating Instructions before first use of this product.
DANGER
DO NOT
cause personal injury.
DO NOT
moving object. This may cause personal injury or product
damage.
DO NOT
cause personal injury.
WARNING
• Use appropriate safety equipment when using power and
hand tools. Failure to do so may cause personal injury or
product damage.
• Use adequate manpower when assembling and moving
this unit. Failure to do so may cause personal injury or
Please
product damage.
DO NOT
cause product damage or personal injury.
• Keep the product on level surfaces. The product may
become unstable and tip if stored or moved on an un-level
surface, which may cause personal injury or product
damage.
• Cabinet MUST be attached to a stud in a wood frame wall.
Failure to do so may cause personal injury or product
damage.
• Hardware is provided for wood frame wall use only.
Concrete or other surfaces will require other hardware
(not provided). Use appropriate hardware per your local
building codes. Failure to do so may cause personal injury
or product damage.
CAUTION
• Appropriately secure this product before moving it with a
forklift.
MAINTENANCE
SAFETY
is used to indicate a hazardous
indicates a hazardous situation which,
is used to indicate a hazardous situation
Read and follow all Safety Rules and
stand on this product. You may fall which may
mount this product on a truck bed or any other
step on the shelves. You may fall which may
alter this product in any manner. This may
Rev A - F1779
loading

Resumen de contenidos para Husky 32FC01BP-THD

  • Página 1 For safety, use a nonflammable cleaning fluid. • Auto wax will preserve the unit’s luster finish. Apply the wax as to 32 IN FLOOR CABINET -- MODEL # 32FC01BP-THD a car. The wax will also help protect the unit against scratches.
  • Página 2 HARDWARE TOOLS REQUIRED: Socket Wrench 3/8in Socket 7/16in Deep-well Socket 7/16in Open End Wrench Square Flathead Screwdriver Cross-tip Screwdriver Drill 1/8in Drill Bit 1/4in Drill Bit LL - Screw Leveler (Qty: 4) HARDWARE INCLUDED: AA - 1/4-20 X 5/8in Carriage Bolt (Qty: 14) MM - #14 x 3 Hex Head Screw (Qty: 1) BB - 1/4-20 X 3/4in Button Head...
  • Página 3 CARTON CONTENTS ATTACH SIDE PANELS Items Needed: A. Side Panel E. Door Left BB - 1/4-20 x 3/4in Button Head Screw (Qty: 4) B. Top F. Door Right DD - 1/4-20 Serrated Flange Nut (Qty: 4) C. Back Panel G. Bottom A - Side Panel (Qty: 2) D.
  • Página 4 ATTACH BOTTOM AND HINGE PLATES INSERT INTERIOR SHELVES Items Needed: Items Needed: AA - 1/4-20 x 5/8in Carriage Bolt (Qty: 4) AA - 1/4-20 x 5/8in Carriage Bolt (Qty: 6) BB - 1/4-20 x 3/4in Button Head Screw (Qty: 8) D - Shelf (Qty: 3) CC - 5/16in Washer (Qty: 4) CC - 5/16in Washer (Qty: 6)
  • Página 5 ATTACH TOP INSTALL LEVELING FEET Items Needed: Items Needed: BB - 1/4-20 x 3/4in Button Head Screw (Qty: 8) LL - Screw Leveler (Qty: 4) DD - 1/4-20 Flange Nut (Qty: 8) B - Top (Qty: 1) Process: Process: • Install (4) Leveling Feet LL. Some adjustments may •...
  • Página 6 DOOR CONSTRUCTION DOOR HINGE ATTACHMENT Items Needed: Items Needed: GG - #10-24 Hex Nut (Qty: 8) AA - 1/4-20 x 5/8in Carriage Bolt (Qty: 4) FF - 3/16in Washer (Qty: 8) CC - 5/16-in Washer (Qty: 4) NN - Left Hinge (Qty: 2) DD - 1/4-20 Serrated Flange Nut (Qty: 4) PP - Right Hinge (Qty: 2) RR - Hinge Plate (Qty: 2)
  • Página 7 MAGNET INSTALLATION LOCK INSTALLATION Items Needed: Items Needed: KK - Single Bitted Lock (Qty: 1) HH - Magnet (Qty: 2) Process: Process: • Assemble the Single Bitted Lock KK. • Place the Magnet HH on the right door in the locations noted.
  • Página 8 OPERATION FINAL PLACEMENT Items Needed: SHELF ADJUSTMENT BB - 1/4-20 x 3/4in Button Head Screw (Qty: 1) • Empty shelf. DD - 1/4-20 Flange Nut (Qty: 1) • Remove fasteners. H - Mounting Bracket (Qty: 1) • Rotate shelf upward and pull forward, as shown. MM - #14 x 3 Hex Head Screw (Qty: 1) •...
  • Página 9 Para su seguridad, utilice un líquido de limpieza no inflamable. ARMARIO PARA PISO DE 81,3 CM (32 IN) -- MODELO N.° 32FC01BP-THD • La cera para automóviles conserva el acabado brillante de la ARMARIO PARA PISO DE 91,4 CM (36 IN) -- MODELO N.° 36FC01BP-THD unidad.
  • Página 10 HERRAMIENTAS HERRAMIENTAS NECESARIAS: Llave de cubo Cubo de 9,5 mm (3/8in) Cubo profundo de 11,1 mm (7/16in) Llave española de 11,1 mm (7/16in) Escuadra Destornillador de punta plana LL - Nivelador de tornillos (cantidad: 4) Destornillador estrellaTaladro Broca para taladro de 3,2 mm (1/8in) Broca para taladro de 6,4 mm (1/4in) PIEZAS INCLUIDAS: AA - Perno con cabeza de hongo de 1,6 cm...
  • Página 11 CONTENIDO DE LA CAJA A. Panel lateral E. Puerta izquierda MONTA LOS PANELES LATERALES B. Parte superior F. Puerta derecha Elementos necesarios: C. Panel posterior G. Parte inferior BB - Tornillo de cabeza redondeada de 19 mm (3/4in) de largo, D.
  • Página 12 INSTALA EL FONDO Y LAS ALAS DE LAS BISAGRAS INSERTA LOS ESTANTES INTERIORES Elementos necesarios: Elementos necesarios: AA - Perno con cabeza de hongo de 1,6 cm (5/8″) de largo, 6,4 AA - Perno con cabeza de hongo de 1,6 cm (5/8in) de largo, mm (1/4in) de diámetro y 20 roscas por pulgada (cantidad: 4) 6,4 mm (1/4in) de diámetro y 20 roscas por pulgada (canti- BB - Tornillo de cabeza redondeada de 19 mm (3/4in) de largo,...
  • Página 13 FIJA EL TOPE INSTALA LA PATA NIVELADORA Elementos necesarios: Elementos necesarios: BB - Tornillo de cabeza redondeada de 19 mm (3/4in) de largo, LL - Nivelador de tornillos (cantidad: 4) 6,4 mm (1/4in) de diámetro y 20 roscas por pulgada (cantidad: 8) DD - Tuerca de la brida dentada de 6,4 mm (1/4in) de diámetro y Proceso: 20 roscas por pulgada (cantidad: 8)
  • Página 14 MONTAJE DE LA PUERTA ADITAMENTO DE LA BISAGRA DE LA PUERTA Elementos necesarios: Elementos necesarios: EE - Perno con cabeza de hongo de 1,6 cm (5/8″in) de largo, AA - 1/4-20 x 5/8in Pernos de Carro (Cant: 4) CC - 5/16-in Arandela (Cant: 4) 6,4 mm (1/4in) de diámetro y 20 roscas por pulgada (cantidad: 4) GG - Tuerca Allen n.º...
  • Página 15 INSTALACIÓN DE LA CERRADURA INSTALACIÓN DEL IMÁN Elementos necesarios: Elementos necesarios: KK - Dispositivo de seguridad con una sola broca (Cant: 1) HH - Imán (Cant.: 2) Proceso: Proceso: • Arme el dispositivo de seguridad con una sola broca KK. •...
  • Página 16 COLOCACIÓN FINAL FUNCIONAMIENTO Elementos necesarios: BB - Tornillo de cabeza redondeada de 19 mm (3/4in) de largo, Ajuste del estante 6,4 mm (1/4in) de diámetro y 20 roscas por pulgada (cantidad: 1) • Vacíe el estante. DD - Tuerca de la brida dentada de 6,4 mm (1/4in) de diámetro y •...

Este manual también es adecuado para:

36fc01bp-thd48fc01bp-thd