General Description And Intended Use; Assembly And Commissioning; Installation Requirements - Bosch Parking Lot Sensor Manual De Usuario

Idiomas disponibles

Parking Lot Sensor | PLS

1 General description and intended use

The Parking Lot Sensor PLS with TPS110 sensor core is designed for detecting parked vehicles in parking lots. The

Parking Lot Sensor PLS with TPS110 sensor core is not designed for use in life-sustaining applications, safety-critical

applications or applications for which a malfunction could lead to bodily harm, death or severe property damage. Only

use the Parking Lot Sensor with components approved by BCDS. This user manual is valid for the Parking Lot Sensor

PLS with TPS110 sensor core by BCDS.

Read carefully and keep the user manual for future reference.

Follow these instructions and all information.

⇒ The Customer must comply with all applicable laws and regulations for the installation and operation

of the Product, and if necessary, obtain necessary approvals. The Customer must take appropriate

measures to avoid injury of third parties, for example, by them tripping over the Product. Therefore,

the product should, for instance, not be installed on the sidewalk.

Before installing the sensors, make sure that the necessary infrastructure is working properly - make sure the

gateways are switched on, that a stable Internet connection has been established, and that there is a backend

connection. The backend, as well as the associated management software, must be functional. Make sure that all of

the required components (see Fig. 1 Parking Lot Sensor PLS with TPS110 sensor core), as well as the tools, are

ready.

Figure 1 Parking Lot Sensor PLS with TPS110 sensor core

distribution, as well as in the event of application for industrial property rights.

Warning

3 | 16

1 Cap

2 Screw

3 Core (sensor TPS110)

4 Base (sensor base)

Tabla de Contenido