Impecca VP-300WK Manual De Usuario página 11

Idiomas disponibles

Idiomas disponibles

POWERING ON AND ADJUSTING THE IMAGE
1
BASIC OPERATION
I N P U T S OU RCE
AV
H D M I1
H D M I 2
VG A
M e d i a P l a y e r
OK
2
3
Press the SOURCE button to display the Input Source Menu.
Press ▼ / ▲ or SOURCE button to select the input source, then
Press OK to select it.
You can press EXIT to quit the Input Source menu.
11
Make sure that all of your video and audio
cables are connected and any USB or SD de-
vices have been inserted. Then, power on the
projector by pressing power on the projector
or the remote. The power indicator light will
turn green. After powering on, use the angle
adjustment knob (1) (if table mounted) to
lower or raise the projector's angle as needed
so that it hits the right area of the projection
surface. You'll then want to focus the image
by rotating the focus knob (2). Depending
on the size of the projection, the edges of the
image may be less sharp than the rest of the
image. This is normal.
If the image is projected at a vertical angle, it
may be wider at the top or bottom (referred to
as a trapezoidal shape). In this case, use the
keystone knob (3) to adjust the image.
POWERING OFF
To power off the projector, simply press
POWER twice. After the first press, you will see
a prompt saying that pressing power again
will turn the unit off and that any other key will
cancel the power-down. Place the lens cover
on the projector when it is not in use.
loading

Productos relacionados para Impecca VP-300WK