Idiomas disponibles
Idiomas disponibles
Table
(Rear Projection)
"Flip" button used to reverse image
MOUNTING THE PROJECTOR TO THE CEILING
Ceiling Mount
Ceiling Mount
(Front Projection)
(Front Projection)
Rotate Setting: 2
Ceiling Mount
Ceiling Mount
(Rear Projection)
(Rear Projection)
Rotate Setting: 1
"Flip" button used to reverse image
PLUGGING IN POWER AND SOURCE DEVICES
Before powering on the projector:
1. Attach the AC power adapter (included).
Note: Plug the power cable into the projector first and then into the power socket.
2. Attach any HDMI, VGA, or AV cables (not included) to the projector and also to their source
(DVD player, computer, etc.).
3. Insert any USB drives or SD cards that will be used.
Note: If you change or remove any cables, USB cards or SD cards at a later time, be sure to
power off the projector first, make the cabling adjustments and then power back on.
The projector does not ship with the necessary mounting
hardware for ceiling mount installation. It does, however,
have a built-in hanger hole to allow for this type of
installation.
Professional installation is strongly
recommended for mounting the projector to the
ceiling. If you are not skilled and comfortable with
mounting it to the ceiling, do not perform a ceiling
installation. Never perform any installation without
assistance.
10
