Urban Prime XP Manual Del Usuario página 8

7. Mode switching
Press to select different modes:
Scene mode
Bicycle mode
Custom mode
Ball mode
8. Unit switching
Long press
shown below:
1BAR = 14.5PSI
9. Preset pressure
Press:
Long press:
Note: the mode and preset pressure value are automatically
saved by the inflator. You only need to switch the mode for the
next use, and the preset pressure will be automatically set.
10. LED lighting
Press to turn on LED light. Press
11. Reset pressure value
Turn the power on, when the measured pressure value is not
zero, long press
reset.
Do not connect the product to any inflatables when resetting.
Note: The product has been calibrated from the factory. When
the difference in altitude or the sensor tolerance shows that
the measured pressure is not zero, manual reset can improve
the accuracy of pressure detection. It is not recommended to
do reset in a high temperature.
Reference
value
38PSI
100PSI
8PSI
to select different units. The unit formula is
adjust the preset measure value.
quickly adjust the preset pressure value.
for 3 seconds to enter automatically
Adjustable range
0~150PSI/0~10.3BAR
0~150PSI/0~10.3BAR
0~150PSI
it again to turn off.
7