Urban Prime XP Manual Del Usuario página 11

Troubleshooting
Phenomenon
Slow inflation
Can't inflate on boot
The preset pressure
cannot be adjusted
Can do inflate but
the air pressure
display does not
change
The inflator auma-
tically shut down
after connecting
hose
There is a leak in the
connection
Solutions
1. Check whether the battery is
fully charged.
2. Check whether the air pipe is
leaking.
3. Check whether the connecting
parts at both ends of the hose
are tightened, and whether there
is air leakage.
4. Check whether the inflatable
item is leaking.
1. Check whether the battery is
fully charged.
2. Check whether the current tire
pressure is higher than the
preset value.
Check whether the current inflation
mode is chosen.
Choose custom mode and preset
pressure value in the range of
3-150PSI.
1. Object whose pressure are below
that of the air pump, such as
ballon, cannot be measured by
the air pump.
2. When tire is empty, measured
pressure will display after
inflating for a while.
The air pump will automatically
turn off without operation in 3
minutes. Press on/off button again
to turn on.
Tighten the connection.
10