Features And Technical Specifications; Hydraulic Connection - Oleo-Mac PW 125C Manual De Instrucciones

GB
FEATURES AND TECHNICAL
SPECIFICATIONS
ELECTRICAL CONNECTION
Mains power supply
Absorbed power
Fuse

HYDRAULIC CONNECTION

Maximum inlet water temperature
Minimum inlet water temperature
Minimum inlet water flow
Maximum inlet water pressure
Minimum inlet water pressure
PERFORMANCE
Water flow
Maximum pressure
Recoil of cleaner gun
Sound pressure level - Uncertainty (*)
Sound power level
Operator arm vibrations - Uncertainty (*)
WEIGHT AND DIMENSION
Lenght x width x height
Weight
Detergent bottle capacity
(*) Measurements taken in compliance with EN 60335-2-79
All features and technical specifications are only indications. The Manufacturer reserves the right to modify the appliance as it
deems necessary.
USAGE
WARNING: First of all read the General Sec-
tion and then this Specific Manual.
> PUT INTO SERVICE
See fig. A
> STARTING UP
See fig. B
> HIGH PRESSURE LANCE
See fig. D
> DETERGENT SUCTION
See fig. E
20
EFCO IP 1250 S
OLEO-MAC PW 125 C
220-240 V - 1 ~ 50/60 Hz
2,35 kW
40 °C - 98 °F
5 °C - 41 °F
900 l/h - 15 l/min - 172 US gph
1 MPa - 10 bar - 145 psi
0,1 MPa - 1 bar - 14,5 psi
498 l/h - 8,3 l/min - 131,5 US gph
15 MPa - 150 bar - 2176 psi
79 dB(A) - 0,7 dB(A)
94 dB(A)
1,5 m/s² - 0,5 m/ s²
330 x 280 x 840 mm - 13 x 11 x 33 in
8,6 kg - 19 lb
0,7 l - 0,18 US gal
> HIGH PRESSURE HOSE
See fig. F
> WATER SUPPLY
Water supply collection
WARNING (symbol): machine not suitable
for connection to the potable water mains.
The cleaner can only be connected to the
water mains if the water mains is separated by
a backflow preventer.
Make sure that the hose is at least Ø 13mm-1/2
inch and that it is reinforced.
WARNING: Water that has flown through
backflow preventers is considered to be non-
potable.
16 A
12 N