SLP - night mode
•
Press the "SPEED/ON" button to switch on the fan and select the operating speed.
•
Press the "MODE" button until the "SLP" light comes on.
•
The fan will cycle on and off - operating at the selected speed.
•
ADDITIONAL FUNCTIONS
OSCILLATION - activation possible only from remote control
•
Use the "SPEED/ON" button to switch on the fan and select the operating speed.
•
Press the "SWING" button on the remote control.
•
The fan will run at the selected speed.
•
To deactivate the function, press the "SWING" button on the remote control.
TIMER
•
This function allows you to set a time after which the unit will automatically switch
off.
•
The function can only be activated when the unit is switched on.
•
Use the "SPEED/ON" button to switch on the fan and select the operating speed.
•
Press the "TIME" button on the remote control or ""TIME" on the control panel.
o 1 time - setting of automatic switch off in half an hour - the "0.5H" light will
come on,
o 2 times - setting automatic switch off in 1 hour - "1H" indicator light will come
on,
o 3 times - switch off in 1.5 hours - "1H" and "0.5H " indicator lights will come on,
o 4 times - switch off in 2 hours - "2H" indicator light will come on,
o 5 times - switch off in 2.5 hours - "2H" and "0.5H" indicator lights will come on,
o 6 times - switch off in 3 hours - "1H" and "2H" indicator lights will come on,
o 7 times - switch off in 3.5 hours - "1H" and "2H", "0.5H" indicator lights will come
on,
o 8 times - switch off in 4 hours - "4H" indicator light comes on,
o 9 times - switch off in 4.5 hours - "4H" and "0.5H" indicator lights will come on,
o 10 times - switch off in 5 hours - the "4H" and "1H" lights will come on,
o 11 times - switch off in 5.5 hours - the "4H", "1H" and "0.5H" lights will come on,
o 12 times - switch off in 6 hours - the "4H" and "2H" lights will come on,
o 13 times - switch off in 6.5 hours - the "4H", "2H" and "0.5H" lights will come on,
o 14 times - off in 7 hours - the "4H", "2H" and "1H" lights will come on,
o 15 times - switch off in 7.5 hours - the "4H", "2H", "1H" and "0.5H" lights will
come on.
•
The fan will run at the selected speed.
•
CLEANING AND MAINTENANCE
− Unplug the appliance from the mains and wait for the propeller to stop before cleaning.
− The appliance must not be submerged in water
− Wipe the unit with a damp cloth and then wipe dry.
− Remove the front net, propeller and rear net - wipe the components with a damp cloth
and then wipe dry.
− Do not use strong or surface-damaging cleaners to clean. Do not use any aggressive
cleaning agents.
•
ENVIRONMENTAL PROTECTION
− The appliance is made of materials which can be recycled.
− It should be handed over to the applicable collection point for the recycling of electrical
and electronic equipment.
13