FUXTEC FX-RM4180 Manual De Instrucciones página 25

Original User Manual FUXTEC Petrol Lawnmower FX-RM4180
⬧ if the device starts to vibrate excessively.
Before use
- Before starting work, familiarise yourself with the device and its functions and controls.
- Check the device for signs of wear or damage before commissioning and after an impact.
- Do not use a device whose switch is defective and can no longer be switched on or off.
- Check that all nuts, bolts, and screws are tight to ensure that the device is operated safely.
- Never use a device with damaged or missing parts. Instead, have them repaired or, if necessary,
replaced by a qualified specialist or specialist workshop.
- Always wear sturdy shoes, long trousers, and the appropriate personal protective equipment
(safety goggles, ear protectors, work gloves with a good grip, etc.) when working with or on the
device. Wearing personal protective equipment reduces the risk of injury.
At use
Do not switch on the appliance when people (especially children) or animals are in the immediate
vicinity. Make sure that children do not play with the device.
Stop work if you notice that people (especially children) or pets are nearby.
Working on steep slopes can be dangerous. Make sure you have a firm footing and mow slowly.
Always mow across the hill and not up and down. Be especially careful when changing direction.
There is a risk of tipping over!
Do not mow on steep slopes. Be careful when moving backwards while cutting and pulling the
mower on yourself.
Refrain from tiling the mower when starting the engine.
Keep a safe distance as indicated by the handle frame.
Wait to switch on the engine until your feet are safe from the cutting blade. Be careful and do not
reach into the rotating cutting blade. Please switch off the device before tipping or transporting it,
e.g., from/to lawns or over paths. Never drive over gravel while the engine is running. There is a risk
of being hit by stones!
Before lifting or transporting the mower, turn off the engine
until the cutting blade stops. Only adjust the cutting height once the engine is switched off and the
cutting blade has reached a standstill. Never open the discharge flap while the engine is running.
Before removing the grass catcher, switch off the engine and wait until the cutting blade has
stopped. After emptying the grass catcher, carefully reattach it and ensure that the grass catcher is
securely attached to the device. If possible, do not mow wet grass. Do not use the garden tool in an
explosive environment with flammable liquids, gases, or dust. When you stop work, never leave the
device unattended and keep it in a safe place.
25