Idiomas disponibles
Idiomas disponibles
SET UP & USE
4.
Wrinkle Prevent
Press to activate Wrinkle Prevent. Press again to cancel selection.
If Wrinkle Prevent is active, it will provide approximately 90 minutes of intermittent
tumbling using unheated air at the end of the cycle to reduce wrinkling.
Since the load is already dry, it can be removed at any time during the wrinkle care
cycle.
5.
Delay
To delay the start of your dryer up to 24 hours, press the Delay button to activate
after the dry cycles have been selected. The number shown on the digital display will
indicate when the dry cycle will start. 1 hour will be added to the start time each time
you press the Delay button up to 24 hours. Once the delay time has been selected,
press Start/Pause to activate. Pressing the delay button to exceed 24 hours until the
display indicates 0H will deactivate the delay function and the display will turn off.
To cancel the Delay Start function after the program has started, press POWER.
6.
Time Adjust
For manual cycles, the drying time needs to be selected. Press Time Adjust
repeatedly to select desired drying time and scroll between 120 minutes, 90 minutes,
60 minutes and 30 minutes. The selected drying time will be illuminated on the LED
display.
7.
Dryness
Press the button to select the dryness level, including More, Normal, Less or Damp
Dry. The selection will illuminate on the LED display.
Different dry levels will result in different drying time. For clothes to be ironed
manually, a lower dry level should be selected.
My Cycle
The DRYNESS button is also used to save a drying cycle as a My Cycle setting. Select
the settings you wish to save. Press and hold DRYNESS for 3 seconds. This will
illuminate on the control panel. Turn the dial to My Cycle to use the saved setting. To
change the saved setting to a different program, select the new settings. Press and
hold DRYNESS again to save the new settings.
8.
Signal
Press the button 3 seconds to mute the audible buzzer at the end of the cycle.
9.
Damp Alert
The unit will beep for 10 seconds when the moisture in the clothes is ideal for ironing.
At this time, you can take garments out and continue drying remaining items by
pressing the "START/PAUSE" button once.
10. Control Lock
Acts as a Child Safety feature that prevents others from inadvertently changing
settings. Press the
function. The Control Lock light
When activated, all buttons except the "Power" will not be functional. Press these
buttons again for 3 seconds to deactivate the Control Lock and the Control Lock
light will turn off.
If the unit is powered Off using the "Power" button while Control Lock is active, the
unit will resume the previous cycle when powered On again. Control Lock will be
cancelled automatically if power is cut off from the unit, is unplugged during a cycle,
a power outage occurs, or the unit is out of service.
OPERATING INSTRUCTIONS
Opening the door during any cycle will instantly stop operation and will require pressing
Start/Pause button to resume operation.
Page 10
and "Damp Alert" together to activate the Control Lock
will turn on.
