Parkside PAA 20-Li B2 Manual De Instrucciones página 93

Charging/operating a USB device
(see fig . C)
NOTE
► If only a small current (<130 mA) is drawn, the
battery adapter switches off after a short time .
It is therefore not possible to charge or operate
such a device .
♦ Connect your USB device to the USB port
the battery adapter
♦ Press the ON/OFF switch
battery adapter
four times and then lights up . The control LED
lights up permanently to indicate the power
supply . Your device can now be charged or
operated on the battery adapter
♦ To turn off the USB port
switch
The control LED
■ 88 │ GB │ MT
. The control LED
again for around two seconds .
goes out after a short time .
.
to activate the
, press the ON/OFF
PAA 20-Li B2
of
flashes
.