EN
G E T T I N G S TA R T E D
Remove all packaging.
1.
Take the water tank off of the base and
2.
remove all tape. [Figure 1.1]
Rinse and reassemble all parts before first use
3.
(see Cleaning, page 9).
Note:
Check to make sure that the water filter
•
is correctly in place. If not, then rotate
the filter clockwise to secure it in place.
[Figure 1.2]
Figure 1.1
Check to make sure that the float is
•
securely in place. [Figure 1.3]
Choose a hard, flat location for the humidifier
4.
at least 30 cm / 12 inches away from any
walls. The surface must be water-resistant.
[Figure 1.4]
Figure 1.3
Mist should be directed away from walls,
5.
furniture, bedding, and appliances. [Figure 1.5]
8
Figure 1.2
12 in /
30 cm
12 in /
30 cm
Figure 1.4
Figure 1.5
Filling & Refilling
Make sure the water tank is clean before filling.
Note:
Turn the humidifier off.
1.
Remove the water tank cover by holding the
2.
nozzle and pulling upward. [Figure 1.6]
Fill the tank with room-temperature water.
3.
[Figure 1.7]
Figure 1.6
Note:
We recommend using purified or distilled water
•
to fill the tank.
Do not
fill past the tank's max water line.
•
Do not
fill with hot water.
•
CAUTION
Do not add water directly into the base
•
chamber. [Figure 1.8]
Do not add water through the mist tube.
•
[Figure 1.9]
Figure 1.8
Replace the water
4.
tank cover.
Make sure the
Note:
nozzle on the water tank
cover is placed over
the mist tube, or the
humidifier may not work
correctly. [Figure 1.10]
Figure 1.7
Figure 1.9
Figure 1.10