Tabla de contenido
The leaves , after properly sanitized, must be overlapped and tightly rolled up with
a diameter suitable to enter inside the round feeding throat, and then using the round
pusher press the leaves roll until to have contact with the slicing disc. The leaves roll
extremities should be cut to obtain a nicer resulting product .
The Expeller Disc must always be used, it does not matter the disc
or grid disc in use.
The expeller disc helps unloading the processed products, pushing
them out through the disc chamber outlet.
PICTURE - 04
2.4 Choosing the feeding throat
Never use your hands or any other object to push the product to be
processed into the feeding throats. Always do it by using Pusher
Lever or the Round Pusher Nº. 02 (Pic.01).
- To insert the product to be processed, use the appropriate feeding throat and
respective pusher.
- The lever must be firmly pressed, otherwise the product being processed may
move inside the feeding throat, providing irregular cuts.
MASTER-SS
- The Processor model
therefore its feeding must be equally fast.
- When processing smaller products such as carrots, you can have more uniform
cuts by using the Round Feeding Throat Nº. 01 (Picture – 05).
- When you use only 1 (one) disc, or when combining it with a grid disc to prepare a
combination of fruit or vegetables, always start with the most tender one and finish
with the hardest one.
- When using the grater disc V, it is possible change the final thickness of the
processed product. If you press pusher slightly, you will have thinner grated
products. When you push it harder, you will have thicker grated products.
07
IMPORTANT
Expeller Disc
IMPORTANT
is a machine that works in high speed,
Tabla de contenido
