Idiomas disponibles
Idiomas disponibles
Setting an alarm
• Press and hold [Menu/Info] and enter 'main menu'.
• Rotate and press [Volume/OK] to select 'Alarms'.
• Rotate and press [Volume/OK] to select 'Alarm 1' or 'Alarm 2'.
• Rotate [Volume/OK] to scroll through each alarm setting. If you want to change a setting, press [Volume/OK]. You can set
the following alarm options:
Enable: Rotate and press [Volume/OK] to choose when you want the alarm to repeat. The available options are 'Off ','Daily',
'Once', 'Weekends' or 'Weekdays'.
Time: Rotate and press [Volume/OK] to adjust the hour of the alarm.
Note: If you have set your radio to use the 12 hour time format, make sure that you select 'AM' or 'PM' before
pressing [Volume/OK].
Repeat to set the minutes of the alarm.
Mode: Rotate and press [Volume/OK] to choose between 'Buzzer', 'Internet radio', 'DAB', 'FM'.
Volume: Rotate and press [Volume/OK] to set the volume of evoke when the alarm sounds.
Save: Rotate and press [Volume/OK] to save the alarm.
Snooze
To initiate snooze function, press [Volume/OK]. The display will show a countdown timer to show how long the alarm will
snooze for. To adjust the amount of time the alarm will be snoozed by, press [Volume/OK] to change the snooze duration in 5
minute intervals up to 15 minutes, and then 30 minutes. To cancel the snoozing interval alarm, press [Power/Standby].
Sleep mode
This function allows programming the device to switch into standby mode by itself after a set period of time.
• To activate the sleep mode function, press [Sleep] repeatedly. The time will change with below interval on every press:
Sleep off - 15mins - 30mins - 45mins - 60mins.
• Stop pressing [Sleep] once your desired sleep time appears on the display. The sleep function will be activated after two
seconds. A sleep icon will appear on the display. The remaining time until the switch to standby mode is initiated, is
displayed next to the icon in the display.
• Once the sleep timer has counted down to zero, the unit will turn into standby mode automatically. To turn the
sleep mode function off whilst the sleep timer is still counting down, press [Sleep] repeatedly to select "SLEEP OFF".
The sleep icon will disappear from the display.
• Press [Sleep] once to show the sleep timer status on the display when turned on.
Equalizer settings
This device features different EQ sound effect modes. Follow below steps to change EQ settings:
• Press and hold [Menu/Info] on main unit or remote control. Rotate and press [Volume/OK] to select "System settings''.
• Rotate and press [Volume/OK] or use the [VOL+] or [VOL-] buttons on the remote control to select the "Equalizer".
• Press [Volume/OK] on main unit or remote control to select.
• Rotate and press [Volume/OK] or use the [VOL+] or [VOL-] buttons on the remote control to choose among 'Normal', 'Flat',
'Jazz', 'Rock', 'Movie', 'Classic', 'Pop', 'News', 'My EQ ', 'My EQ profile setup'.
Manually setting the bass and treble value
• Press and hold [Menu/Info] to view the main menu.
• Rotate and press [Volume/OK] to select System settings>Equalizer>My EQ profile setup.
• Rotate and press [Volume/OK] to choose 'Bass' or 'Treble'.
• Rotate and press [Volume/OK] to set the level from '-14dB' (low) to '+14dB' (high).
Time and date settings
The clock will automatically set itself using your network, DAB or FM radio signal. If the time or date does not update
automatically, you can manually set it using this option.
Note: Any time or date updates received by a digital broadcast will override manual settings.
Setting the time and date manually:
• Press and hold [Menu/Info] and enter 'main menu'.
• Rotate and press [Volume/OK] to select 'System settings' > 'Time/Date'.
• Rotate and press [Volume/OK] to choose 'Set Time/Date'.
• Rotate and press [Volume/OK] to set the day of the month. Repeat to set the month and year.
• Rotate and press [Volume/OK] to set the hour. Repeat to adjust the minutes.
Note: If you have set the 12 hour time format, make sure that you select the 'AM' or 'PM' version of the hour before pressing
[Volume/OK].
Time and date synchronization
You can synchronize the time and date via FM, DAB or network signal.
To specify the clock synchronization options:
• Press and hold [Menu/Info] and enter 'main menu'.
• Rotate and press [Volume/OK] to select 'System settings' > 'Time/Date'.
• Rotate and press [Volume/OK] to choose 'Auto update'.
13
