Original Bedienungsanleitung FUXTEC FX-MS152T_de_en_fr_ita_es_rev05
29. Cutting method
CUTTING METHOD
(a) Use the front left side cutting.
(b) Guide the blade from your right to left with it tilted slightly to your
left.
(c) When mowing a wide area, start working from your left end to avoid
interference of cut grass.
(d) The blade may be seized by weeds if the engine speed is too low, or
the blade cuts too deep into weeds. Adjust the engine speed and
cutting depth according to the condition of object.
WARNING
• If the grass or other object gets caught in the blade, or if the unit starts to
shake or vibrate, turn off the engine and check the whole unit. Change the blade
if it has been damaged.
• Turn off the engine and make sure the blade has completely stopped before
checking the blade, and removing any object got caught in.
30. Maintenance
Maintenance, replacement, or repair of the emission control device and systems may be
performed by any non-road engine repair establishment or individual.
WARNING
• Always be sure to stop the engine before inspecting the brush cutter for
problems or performing maintenance.
• Never alter the brush cutter or take the engine apart.
48
