Idiomas disponibles
Idiomas disponibles
3- PUSH BUTTON FUNCTIONS
A-
POWER
B-
DOWN
C-
DISPLAY
D-
UP
E-
TIMER
4- OPERATING INSTRUCTIONS
1.
Plug in the unit.
2.
Press
button to start operation, the power indicator will be on. Press it again to stop operation.
3.
Press
30% to 90% at 5% intervals or "CO" (continuous). After a period of working, when environment
humidity is lower than the selected humidity by 2%, compressor will stop; When environment
humidity is equal to or higher than the selected humidity by 3%, compressor will restart once
3-minute compressor protection time over. When setting the humidity to "CO", the compressor will
run continuously.
4.press
button can be timer setting：
Press the button to program the time when the unit turns on and turns off. If you want to cancel the
timer programming, press the button to adjust the time at 0, and press the button ,it will be circulate
from 0-1-2......23-24.It is the programmed time to switch the machine. The programmed time will be
canceled when to switch compressor manually each time. The programmed time remains unchanged
if the machine stops to wok due to water tank full or during defrosting.
5- DRAINING THE COLLECTED WATER
When the drainage tank is full, the tank full indicator light will turn on, the operation will stop automatically
and the buzzer will beep 15 times to alert the user, that the water need to be emptied from the drainage
tank.
60
button to set the desired humidity level in the room, which can be set from
