UGREEN CM292 Manual Del Usuario página 9

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
Linux
Step: "Applications" > "Disks", select the external drive and click "Format Partition"; after
formatting please enter "Mount", then your PC/laptop can read the drive.
V Other Settings
1 Add New Drives
Warning
A new hard drive requires RAID mode switching twice, then all hard drives will be formatted. Please
back up all the data in advance.
Add a new drive
If there are less than 5 hard drives in the current RAID mode, then you can add new drive(s).
· Power off: press and hold the power button (about 3 seconds) until the power indicator goes off.
· Put the new hard drive in the drive tray and put it into the enclosure.
· Change DIP switch to PM mode.
· Press and hold "RESET" and long press the power button (about 3 seconds) to turn it on; after 15
seconds release "RESET", and then the hard drive indicator flashes white.
· Power off again, and change DIP switch to the original RAID mode.
· Repeat step 4.
· After the hard drive is connected and partitioned, then it's successfully added.
2 Replace the Broken Drive
When using RAID 1/3/5/10/Clone modes, you'll have to replace with a brand new hard drive if one
of your disks fails.
· Press and hold the power button (about 3 seconds) to turn it off.
· Replace the broken disk with a new one.
Tip: capacity of new hard drive ≥ capacity of broken hard drive.
· Press and hold the power button (about 3 seconds) to turn it on.
· When the disk indicator flashes red and white alternately, the new disk starts to restore (back up)
data.
· When the drive indicator turns solid white, the data recovery (backup) is completed.
11
VI Notes
· For optimal performance, it is recommended that you use the product on the device with USB 3.0
or above ports.
· Please put the product in an environment of stable temperature and humidity to avoid direct
sunlight or any liquid.
· When there is a thunderstorm or an unstable voltage, please power off the product to avoid the
potential damage.
· Please power off the product before you clean it; clean it with a wet wipe, chemicals or spray
cleaner are not allowed.
· Do not drop, crush, hit, or throw the product.
· The product contains small components, please keep out of reach of children.
· Please do not disassemble or repair this product by yourself. Improper disassembly may lead to
electric shock or other potential danger, please contact UGREEN aftersales.
12
loading