UGREEN CM292 Manual Del Usuario página 5

② Install back the fixing plates and be careful of their direction.
2.2 2.5-inch Hard Drive
① As the following picture, remove one of the plates first.
② Put the 2.5-inch hard drive on the drive tray.
Pins of the hard drive face down.
Pins of the hard drive
05
③ Flip the tray over and make sure that the four holes of hard drive align with those of the
tray, then screw the hard drive firmly.
3 Put Drive Tray Back Into the Enclosure
Put the drive tray back into the enclosure, then slowly push it to the SATA port.
Warning
Do not unplug the hard drive when the device is powered on, please follow the steps below:
① Safely eject the hard drive from your PC/laptop.
② Turn the device off and take out the hard drive.
06