Assembling The Unit - Stihl HL-KM Manual De Instrucciones

English

Assembling the Unit

Removing the Potective Cap
If a cap is fitted on the end of the
KombiTool's or basic power tool's drive
tube:
Pull the protective cap off the end of
N
the drive tube and keep it in a safe
place.
If the plug comes out of the drive tube
when you pull off the cap:
Push the plug into the drive tube as
N
far as stop.
12
Mounting the Gearbox
11
10 10
5
Loosen the clamp screws (10).
N
Push the gearbox (11) onto the
N
drive tube (5), turn the gearbox (11)
back and forth as necessary.
11
12
Once the end of the drive tube is
inserted beyond the slot in the
clamp (12):
Push the gearbox (11) fully home as
N
far as stop.
Tighten down the clamp screws
N
moderately.
Line up the gearbox (11) with the
N
powerhead.
Tighten down the clamp screws
N
firmly.
HL-KM