Idiomas disponibles
Idiomas disponibles
Know your product
1. ON/OFF switch
2. Soft grip
3. Battery pack
4. Battery release tabs
5. Variable speed control thumbwheel
6. Ventilation openings
GB
7. Accessory holder
8. Clamping hex screw
9. Flush cut blade
10. LED worklight
11. Battery charge-
control indicator
12. Charger base
13. Charging
10
indicators
14. Charger plug pack
15. Charger plug
pack pin inserts
9
13
1
2
5
7
6
8
12
14
15
12
Important information – Product care
This tool uses Lithium Ion Battery Cells. Care
3
MUST be taken to ensure both the safety and life of the
pack is maintained. Ensure you have read all of the safety
notes in the previous pages before using the tool.
Treat the battery pack with care and within the guidelines
of this manual. If the pack does become immersed in water
or any fluids, or is subject to a sever drop etc, or it does not
operate within the guidelines of this manual, immediately
STOP using the battery pack and have it checked.
WARNING:
When using electric appliances, basic
precaution should always be followed, including the
following:
1. To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
2. Only use attachments recommended or sold by
4
manufacturer.
3. Do not use outdoors.
4. For a portable appliance – To reduce the risk of electrical
shock, do not put the multi-tool and battery pack in water
or other liquid. Do not place or store appliance where or
can fall or be pulled into a tub or sink.
5. The safe use of this multi-tool requires an understanding
of the information on the tool and in this operator's
manual, as well as knowledge of the project you are
attempting. Before using the product, familiarize yourself
11
with all operating features and safety rules.
Assembly
WARNING:
•
If any part is broken or missing, do not attempt to plug in
the power cord or operate the multi oscillating tool until
the broken or missing part is replaced. Failure to do so
could result in possible serious injury.
•
Do not attempt to modify this multi oscillating tool or
create accessories not recommended for use with this
multi oscillating tool. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possible serious injury.
•
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
multi oscillating tool when assembling parts.
This product has been shipped completely assembled.
•
Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing are
included.
•
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
•
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
•
If any parts are damaged or missing, please refer to the
numbers listed on the back page of operator's manual.
Packing list
•
Multi-tool, straight edge flush cut blade, segment
saw blade, hardened steel scraping blade, sanding
plate and 12pcs sandpaper, hex key and one set
clamping hex screw, charger base, plug pack charger,
4 x charger plug pack pin assy's.
13
GB
