Idiomas disponibles
Idiomas disponibles
Changing the oil
• We recommend changing the oil once annually to preserve the service
life of your device. To drain the oil, remove the rubber plug from the oil
reservoir, place the jack on its side and drain the oil into a collecting tray.
• Dirt and foreign bodies must not find their way into the hydraulic system.
Lubrication
Lubricate all rotating parts with regular lubricating oil every 3 months.
Preventing rust formation
Inspect the pressure piston for signs of rust and corrosion every 3 months.
Clean if necessary and wipe with an oil cloth. When out of use, the saddle
and pressure piston must be fully lowered.
Service life: 2 years with normal, private use.
Rules for maintenance and repair
• When topping up the hydraulic system, the properties of the hydraulic
fluid used in the jack and the fill level specified by the manufacturer must
be considered and complied with.
• Check the condition of the labels regularly and ensure that the labels
correspond with the originals.
• The jack must be maintained and repaired in accordance with the
manufacturer's instructions. Maintenance and repair must be carried out
by an expert.
• Moving part deformed or oil leak – contact service. Apply appropriate
measures to ensure that the no oil spills can occur, e.g. using a suitable
filling aid.
• Modifications are not permitted.
PRODUCT DIAGRAM
1 Handle (two sections with spring-
loaded knob, two sections with bolts)
2 Handle bushing
3 Saddle
4 Lifting arm
5 Outlet valve
6 Foot pedal
EN
35
