Idiomas disponibles
Idiomas disponibles
completely unrolled. DO NOT allow the hose to become tangled during
operation.
3) Install a nozzle or another tip as needed.
Connect the machine to a water and electricity supply.
4)
STREAM ADJUSTMENT
The angle of the water jet from the gun can be adjusted on some nozzles by rotating
the nozzle. This will change the spray pattern from a narrow, high-power spray at
an angle of about 0° to a fan-shaped spray at an angle of 60° (see Fig. 2).
Figure 2 - Adjusting the spray pattern with a nozzle (not applicable to some
The narrow jet hits the surface with great force and ensures maximum cleaning in
the concentrated area. However, this high-impact narrow jet must be used with
care as it can damage certain surfaces.
A wide fan-shaped stream of water will distribute the water jet over a larger area,
providing excellent cleaning performance with a reduced risk of surface damage.
Large areas can be cleaned faster with a wide range of options.
nozzles)
Figure 3 - Strong, narrow stream
