Blocks PRO 30 Manual De Mantenimiento página 36

04
Unclog Nuzzel
04.1 Preheat PLA
4.1.1. With the machine turned on but not printing, select Control.
4.1.2. Select the Preheat PLA option , set the nozzle to 180º and wait until the temperature
stabilizes.
1 2
04.2 Remove safety washer and tube
4.2.1. Remove the safety washer.
(See page 33, task 3.2 to Remove the safety washer)
4.2.2. Remove the filament tube.
(See page 33, task 3.3 to Remove the filament tube)
36 PRO 30
MANUAL DE MANUTENÇÃO